|
Page |
Cover Page with 3-D
Drawings |
| 1 |
Release
of Liability |
| 2 |
Fuselage Frame |
| 3 |
Fuselage Station
Views |
| 4 |
Fuselage Details |
| 5 |
Firewall |
| 6 |
Landing Gear |
| 7 |
Shock Strut &
Cabane Vee |
| 8 |
Elevator &
Stabilizer Layout |
| 9 |
Elevator &
Stabilizer Fittings |
| 10 |
Rudder, Fin &
Tail Wheel |
| 11 |
Cockpit Seats |
| 12 |
Seat Layout |
| 13 |
Top Wing &
Rear Spars |
| 14 |
Bottom Wing &
Front Spars |
| 15 |
Spar Layout |
| 16 |
Upper Spar Fittings |
| 17 |
Lower Spar Fittings |
| 18 |
Leading Edge Skins |
| 19 |
Ailerons |
| 20 |
Wing Parts Diagram |
| 21 |
Torque Tube &
Bell Crank |
| 22 |
Elevator Control |
| 23 |
Aileron Deflection
Detail |
| 24 |
Nose Cowl |
| 25 |
Engine Cowl |
| 26 |
Fuel Tank
Installation |
| 27 |
Interplane Struts
& Wires |
| 28 |
Cabanes & Attach
Fittings |
| 29 |
Instrument Panel |
| 30 |
Fwd
Instrument Panel |
| 31 |
Bulkhead
Station 3 |
| 32 |
Bulkhead
Station 4 |
| 33 |
Turtleback |
| 34 |
Engine
Mount |
| 35 |
Rudder
Pedals & Floorboards |
| 36 |
Electrical System |
| 37 |
N101HB Weight &
Balance |
|
HATZ
Bantam Plans
If you are one of the many interested in
the Hatz Bantam, here is an update. The Hatz Bantam drawings are
complete.
Bantam
Special
$360 plus S&H.
Additional full scale patterns
for any part that will fit on a 24" x 36" page (printed on
dimensionally stable paper) will be available for an additional charge.
HOW
TO ORDER
The plans are modified from the
original Hatz CB-1 and document the first Hatz Bantam serial #001,
the "N. American Flyer".
This aircraft was built by Mark Marino, North Director of the Hatz Biplane
Association.
Hatz CB-1 plans are available through:
Hatz Biplane Association http://www.weebeastie.com/hatzcb1/
|
